WALKER ANNUAL MAINTENANCE PLAN

Join Today and Start Saving!

There are a number of heating and air conditioning problems that occur from simple neglect of your systems. For example, air conditioning and heating costs can double without a noticeable reduction in comfort, and this could be due to refrigerant being undercharged by as little as 10%. Refrigerant should never actually have to be replaced. If you find your unit in need of replacement or augmented refrigerant, chances are very high that this is due to a leak. A leak like this needs to be identified and repaired as soon as possible, or else it will cause permanent failure on your equipment and damage the environment.

Approximately 80% of these issues could be solved by regular unit maintenance.

WHY BECOME A WAM PLAN MEMBER?

A dirty indoor and outdoor system could increase your electrical usage by 50% or more. Unrepaired small problems can lead to very expensive repairs or premature replacement of equipment. Depending on the current condition of your equipment this service may pay for itself several times over in energy savings alone. Annual safety checks can eliminate dangerous problems.

For warranty coverage, most all manufacturers require the system to be maintained annually by a licensed contractor; and the owners to maintain written records of all annual maintenance. So, when you become WAM (Walker Annual Maintenance) Plan client, you can expect our highly trained and competent technicians to become completely familiar with you and your air conditioning and heating system.

As a WAM Plan member, you are guaranteed:

Fast Service

Appointments set within a 24-hour period

Free Tune-Ups

2 complimentary precision tune-ups

Enjoy Savings

Discounts on new equipment

21-Point Inspection

1. Check & Monitor System Pressures

2. Inspect All Electrical Connections to System

3. Monitor Compressor for Proper Amperage, Voltage Draw, and Wiring Connections

4. Monitor Condenser Fan Motor for Proper Amperage, Voltage Draw, and Wiring Connections

5. Inspect the Contactor for Burn Marks and Voltage Dropping

6. Check Tolerance of Dual Run Capacitors

7. Inspect High Voltage Disconnect

8. Monitor for Proper Voltages Entering the System (Per Manufacturer Specs)

9. Rinse and Clean Outdoor Coils

10. Check inrush Amps (Per Manufacturer Specs)

11. Check the Condition of Filters

12. Inspect Ductwork (Leaks, Proper Sizing, Design)

13. Monitor Blower Motor Amp Draw

14. Check Thermostat Functionality

15. Test Ignitor Performance

16. Check Gas Valve (Proper In and Out Pressures)

17. Inspect and Clean Flame Sensor

18. Check Heat Exchanger

19. Clear Inducer Motor Ports for Proper Amperage, Voltage Draw, and Wiring Connections

20. Check Drain Lines (Primary and Secondary)

21. Inspect Condition of Emergency Drain Pan

  • AC Installation
  • AC Repair
  • AC Service & Maintenance
  • Air Duct Repair & Installation
  • Heating Installation
  • Heating Repair
  • Heating Service & Maintenance
  • Furnaces
  • Heat Pumps
  • Thermostats
  • Indoor Air Quality

JOIN THE WALKER ANNUAL MAINTENANCE PLAN

Make the right choice and turn to Dallas’s most trusted name in heating and cooling. Call Walker Air • Plumbing • Electric at 214-765-4818 to request more information or to sign up for our WAM Plan today.

    HVAC License Number: TACLA00069123C|Electrical License Number: TECL36792|Plumbing License Number: M41793© 2022 All Rights Reserved.